- Location
- stamford CT
if any one has any fish tank for sale please pm me
any one have any fish tanks for sale
- Thread starter jjbbambam
- Start date
- Location
- Long Island
Pm sent
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Location
- Huntington
100 gallon DSA pro
Sent from my SM-G920V using Tapatalk
Sent from my SM-G920V using Tapatalk
- Location
- stamford CT
guys just pm me with pics sorry working alot of hours latley so had not much time to see the thread
- Location
- Wallingford, CT
Have a 180g in Wallingford, CT if interested, asking $600.
Tank has a few scratches but it's a Glass Cages tank that is euro-braced on top and bottom so no cross braces to block any light. Has low iron glass front panel and a center overflow designed for high flow. Has two 1.5" drains and two returns that are either 1" or .75" (don't recall exactly). Stand is 2"x4" frame, oak skinned/cherry stained and canopy is a two-piece design where front half can be lifted off for added access besides the front doors.
Tank and stand is in decent shape, canopy inside can use a fresh coat of white oil based paint, probably should change out the canopy door hinges. Normal ding here and there but the stand is tall, maybe 40" or a little more (not able to measure at the moment). Will leave the 3 IceCap fans in the canopy and the Gen1 Reefkeeper to temp control the IC fans and also cause I drilled a hole in the door for it. Back of stand is open and there is an RJ-45 jack/plate on the left side of the stand. Tank is drained and wiped down but could use a full vinegar bath for the overflow box and back wall. No lighting or Sea Swirls included.
Broke down the system due to temporary move. Had the system for 9 years, tank and stand are built well. A few pics that I had on my computer:
Tank has a few scratches but it's a Glass Cages tank that is euro-braced on top and bottom so no cross braces to block any light. Has low iron glass front panel and a center overflow designed for high flow. Has two 1.5" drains and two returns that are either 1" or .75" (don't recall exactly). Stand is 2"x4" frame, oak skinned/cherry stained and canopy is a two-piece design where front half can be lifted off for added access besides the front doors.
Tank and stand is in decent shape, canopy inside can use a fresh coat of white oil based paint, probably should change out the canopy door hinges. Normal ding here and there but the stand is tall, maybe 40" or a little more (not able to measure at the moment). Will leave the 3 IceCap fans in the canopy and the Gen1 Reefkeeper to temp control the IC fans and also cause I drilled a hole in the door for it. Back of stand is open and there is an RJ-45 jack/plate on the left side of the stand. Tank is drained and wiped down but could use a full vinegar bath for the overflow box and back wall. No lighting or Sea Swirls included.
Broke down the system due to temporary move. Had the system for 9 years, tank and stand are built well. A few pics that I had on my computer:
Sponsor Reefs
We're a FREE website, and we exist because of hobbyists like YOU who help us run this community.
Click here to sponsor $10:
