Elite Aquatics Sump asking $200 or trade. Has 2 1" drain holes + adjustable baffle for skimmer height with laser etched height markings, ATO sensor holders, and probe holders.
Great condition. FYI (The cover for the drain section has a slight chip but it does not effect the operation and fits over the opening perfectly). I'm the second owner and never used it only fresh water leak tested. This is a great adjustable sump. I have no need for it.
Comes with 2 bulkheads. I think I have a few filter socks as well.
Primary trade I'd be willing to consider is a great condition mp10qd.
Specs on new sump I have the older version. It's pretty much the same except that it has 2 instead of 3 bulkheads and it doesn't have a removable media tray and is all white.
http://www.elite-aquatics.net/index.php?route=product/product&path=55&product_id=49
Dimensions: 33? long x 15? wide x 15? high
Skimmer Section: 15.75? x 14?
Return Pump Section: 8.25? x 14?
Approx. Total Water Volume: 27.1 gallons
Skimmer Water Level: 6? to 11? adjustable
Removable media tray in between the baffles use for filter pads and bags of media (filter pad and bags for media not included)
Engraved water level markings to allow easy setup of skimmer water depth from 6? to 11?
Poly-carbonate lid over Filter Sock Chamber
Chamfered edges throughout
Top Brace of the RS Series sumps have cord routing and dosing connections built in
Drain Input Fittings: 2 x 1? ABS Bulkheads. Easy hook-up to our Elite Overflow
Filter Socks Holders: 2 x 4?
Web site for Elite Aquatic
http://www.elite-aquatics.net/index.php?route=product/product&path=55&product_id=49
Thanks for looking.
See link for photo
https://www.flickr.com/gp/152028960@N02/FF2D9W
Sump is a little dusty but will be cleaned up prior to pick up.
Great condition. FYI (The cover for the drain section has a slight chip but it does not effect the operation and fits over the opening perfectly). I'm the second owner and never used it only fresh water leak tested. This is a great adjustable sump. I have no need for it.
Comes with 2 bulkheads. I think I have a few filter socks as well.
Primary trade I'd be willing to consider is a great condition mp10qd.
Specs on new sump I have the older version. It's pretty much the same except that it has 2 instead of 3 bulkheads and it doesn't have a removable media tray and is all white.
http://www.elite-aquatics.net/index.php?route=product/product&path=55&product_id=49
Dimensions: 33? long x 15? wide x 15? high
Skimmer Section: 15.75? x 14?
Return Pump Section: 8.25? x 14?
Approx. Total Water Volume: 27.1 gallons
Skimmer Water Level: 6? to 11? adjustable
Removable media tray in between the baffles use for filter pads and bags of media (filter pad and bags for media not included)
Engraved water level markings to allow easy setup of skimmer water depth from 6? to 11?
Poly-carbonate lid over Filter Sock Chamber
Chamfered edges throughout
Top Brace of the RS Series sumps have cord routing and dosing connections built in
Drain Input Fittings: 2 x 1? ABS Bulkheads. Easy hook-up to our Elite Overflow
Filter Socks Holders: 2 x 4?
Web site for Elite Aquatic
http://www.elite-aquatics.net/index.php?route=product/product&path=55&product_id=49
Thanks for looking.
See link for photo
https://www.flickr.com/gp/152028960@N02/FF2D9W
Sump is a little dusty but will be cleaned up prior to pick up.
Last edited: