Skinner help

[saltykid85]

Most likely the wrong forum, but yesterday I was carrying my ATB 8.5 Skinner when the cup fell of and hit the tile floor.

It cracked the cup, where the see thru acrylic meets the bottom colored rim, severed break around. Is there a way to glue the acrylic back to the plastic rim? Thinking some sort of Weldon for structure support, followed by silicone to ensure seal.

Any help would be appreciated

 

[NYreefNoob]

think its weldon 16 but cant remember, if glued correctly you wont need to silicone it

 

[saltykid85]

Where can I obtain that? If only mail order, is there anything I can use from home Depot or Lowe's instead?

 

[1UCKY]

Where can I obtain that? If only mail order, is there anything I can use from home Depot or Lowe's instead?

This will do the trick: https://m.lowes.com/pd/Devcon-Clear-Epoxy-Adhesive/4006643

 

[saltykid85]

This will do the trick: https://m.lowes.com/pd/Devcon-Clear-Epoxy-Adhesive/4006643

Safe enough in the even skimmate goes back in sump? Would I need silicon in top of that to make seal?

 

[Odysi]

Weld On 16 will fuse it back together. i dont know of anywhere local that sells it ive only bought it on amazon or ebay. My guess is you can try Canal Plastics in the city.