- Location
- Long Beach, LI
Bought new over winter for a tide pool project that will not be happening moving forward. Tank has not been used at all. The peel paper is still attached to all surfaces of the tank. The following is taken directly from Modular Marine's website:
FRAG TANK
Dimensions: 24" x 24" x 12" tall
1/2" cast acrylic side panels
1/4" cast acrylic base
Beautifully welded water tight joints that will last forever
OVERFLOW SYSTEM
- 800+ GPH capability
- Entire skimmer box pulls off for easy cleaning!
- Slimmest and shortest skimmer box on the market!
- Countersunk lids made from poly-carbonate for both boxes
- Perimeter braced exterior box
- Attaches through tank with two 1" bulkheads
- Ramped overflow teeth for silent water flow
- Three 1/2" or 3/4" uni-seal drains
One main advantage of our design that no one else has is if you close your drain valves our exterior box will not overflow. This is because our exterior plumbing box mounts at the same height as the skimmer box. All the other designs on the market have an exterior box that is mounted well below the skimmer box so if you shut the drain valves the exterior box will overflow.
DIMENSONS:
inside skimmer box- 8" x 1.125" x 3.75" tall
outside plumbing box- 8" x 3" x 6.25" tall
- Professionally fabricated from CNC machined parts
- 1/4" cell cast acrylic (highest quality)
- 1/4" poly-carbonate lids will never bow or warp
- Bent front corners on both boxes (no seams)
- Polished edges
- 100% water tight joints
This two part overflow box system also comes with two lids, a drilling template, two 1" bulkheads (with nuts), two 1" bulkhead gaskets (to go between tank and exterior plumbing box), and three 1/2" uni-seals.
QUALITY MADE IN THE USA.
-------------------------------------------------------
Again, this was never used. Will include a Innovative Marine mesh DIY lid in 24X24, and 2 Mars Aqua 165W lights. Looking for $300.
FRAG TANK
Dimensions: 24" x 24" x 12" tall
1/2" cast acrylic side panels
1/4" cast acrylic base
Beautifully welded water tight joints that will last forever
OVERFLOW SYSTEM
- 800+ GPH capability
- Entire skimmer box pulls off for easy cleaning!
- Slimmest and shortest skimmer box on the market!
- Countersunk lids made from poly-carbonate for both boxes
- Perimeter braced exterior box
- Attaches through tank with two 1" bulkheads
- Ramped overflow teeth for silent water flow
- Three 1/2" or 3/4" uni-seal drains
One main advantage of our design that no one else has is if you close your drain valves our exterior box will not overflow. This is because our exterior plumbing box mounts at the same height as the skimmer box. All the other designs on the market have an exterior box that is mounted well below the skimmer box so if you shut the drain valves the exterior box will overflow.
DIMENSONS:
inside skimmer box- 8" x 1.125" x 3.75" tall
outside plumbing box- 8" x 3" x 6.25" tall
- Professionally fabricated from CNC machined parts
- 1/4" cell cast acrylic (highest quality)
- 1/4" poly-carbonate lids will never bow or warp
- Bent front corners on both boxes (no seams)
- Polished edges
- 100% water tight joints
This two part overflow box system also comes with two lids, a drilling template, two 1" bulkheads (with nuts), two 1" bulkhead gaskets (to go between tank and exterior plumbing box), and three 1/2" uni-seals.
QUALITY MADE IN THE USA.
-------------------------------------------------------
Again, this was never used. Will include a Innovative Marine mesh DIY lid in 24X24, and 2 Mars Aqua 165W lights. Looking for $300.
