• Why not take a moment to introduce yourself to our members?

aaron

Australian
Location
Sydney
Rating - 100%
16   0   0
Reef Stoop sale, CHEAP!

I have accumulated a pile of reef equipment over the years and now i really need to clean out the basement. This is going to be the first step before i break down the tank and sell everything so keep an eye out those of you who have seen the tank and wanted a heads up.
here's a start on what i have:
• 2 AGA 10 gallon tanks- drilled for 3/4" bulkheads $20 each
•Quarantine tank setup - 10Gal tank with lid and small wet-dry filter and return pump,
heater, small skimmer, resin coral, $35 .SOLD
• 9W double helix UV sterilizer $20
•Titanium Heater with remote temp sensor $20
• 1 PC remote ballast for dual 55w straight pin PC's on 6' leads. Independent switches and powercords for seperate timers with two actinic bulbs $45
• 4' black metal lighting pendant, with 2 SE mogul fixtures and two fans. No ballast $40 SOLD
• Custom Sealife double helix UV sterilizer, 9W needs new bulb $25
• float switch for RO unit (never used) $5.00
• Turboflotor 1000 skimmer - in sump model, some cracks but they have been repaired and it works well - I have a Rio 2700 i can put on this but you'd be better off getting the ocean runner upgrade. $45
• Ocean runner 3500 almost new, used for a month $60 SOLD
• Vortex diatom filter $50
• DIY needle wheel skimmer approx 24" high $20 SOLD
• DIY External skimmer $30
• DIY Kalk or phosban reactor made from RO canister $20
• Tropical fish Hobbyist and Fresh and Marine Aquarium magazines (about 20) $10 for the lot (I'll update exact amount once i get home)
• 6' 3/4" white spa flex pipe and adhesive (never opened) $8 SOLD
• Coralife Mini Compact Fluorescent, 50/50 Bulb for refugia, new $5 fits standard screw light socket
• Coralife digital thermometer, $5
• huge bag of PVC fittings, elbows, T's, unions and Ball valves - mostly 1" and 3/4" with some 1/2" as well. I can provide more detail if interested $20 SOLD


Pick up is in Park slope Brooklyn, PM me for exact address and for additional info.
I will post more equipment later tonight.
 
Last edited:

aaron

Australian
Location
Sydney
Rating - 100%
16   0   0
Here's a couple of shots of the light pendant.
shaun, I have a couple of 10 Gals available at the moment that could be easily made into sumps but that's all. My main tank is still up and running but that only has a 30Gal sump anyway. i'll be selling that once the livestock is gone.
 

Attachments

  • attachment.jpg
    attachment.jpg
    130.7 KB · Views: 556
  • attachment-1.jpg
    attachment-1.jpg
    207.2 KB · Views: 557

aaron

Australian
Location
Sydney
Rating - 100%
16   0   0
Here's a photo of some more of the stuff.
Magazines - there are 25 of them. - $8.00
I have two pieces of 3/4" lockline with the threaded 3/4" ends and the spreading nozzels for the ends (if I can find them) $8.00 for the lot, including a couple of threaded elbows

First person to PM me and pay up gets it, I have been burnt too many times on this site with people dropping out on me at the last minute. ITS NOT YOURS UNTIL I GET THE MONEY
 

Attachments

  • DSCN0080.JPG
    DSCN0080.JPG
    42.1 KB · Views: 454
  • DSCN0081.JPG
    DSCN0081.JPG
    25.5 KB · Views: 445
Last edited:

aaron

Australian
Location
Sydney
Rating - 100%
16   0   0
The other skimmer is a DIY needlewheel skimmer I built a couple of years ago for my Nano tank. Its an In sump and is currently set up to run with a maxi jet but you could easily mod it to fit a mesh wheel pump or something $20 or $30 with the Maxi-jet.

Tunicata, if you bought either skimmer i would throw in the hydrometer.
 

aaron

Australian
Location
Sydney
Rating - 100%
16   0   0
DIY Skimmer is Sold, but there's still loads more equipment left. I will do deals on multiple items, so make me an offer. I need to get rid of a lot of stuff
 

aaron

Australian
Location
Sydney
Rating - 100%
16   0   0
Here is some shots of the plumbing stuff I have, most stuff is 1/2", 3/4" and 1", there is a combination of slip fittings and threaded. two pieces of Lockline, spaflex, a couple of threaded to hose barb adapters, I aso have a few random bits of vinyl tubing if anyone needs them
$20 for the lot.
 

Attachments

  • DSCN0008.jpg
    DSCN0008.jpg
    80.8 KB · Views: 86

bigbris1

Re-reefer
Location
Manhattan
Rating - 100%
42   0   0
Dr Gonzo, you can go for it, I only need like 3 or 4 pieces of that lot. I can just pick up the stuff I need when I buy the rest. Thanks Aaron for posting the pic. Still may come over for the candy canes. I'll call you.
 

aaron

Australian
Location
Sydney
Rating - 100%
16   0   0
I have a pump with a needle wheel for the turboflotor but you would need to do some work to get the input and output pipes it to fit. I'll have a look and see if i have anything kicking around to adapt it.
 

Sponsor Reefs

We're a FREE website, and we exist because of hobbyists like YOU who help us run this community.

Click here to sponsor $10:


Top