LED for ppl with Good Taste

[Aqua Pro Builder]

These strip light are the best looking LED strips I have seen!!! Great for car, bar, restaurant, home, club accent lighting. I tape them to my DJ audio/video chest. They are flexible curl along the dash board or drums. You can join strips together like in the pic to have multiple colors and longer length under 1 power supply. 11.8in per strip. It does not come with power supply but you can get the cheapest ac/dc 12VDC adapter(like $6.95) as long as they are modulated/regulated from Radio Shack. I would avoid 99cents store because a lot o them are not modulated. DON'T USE the ac adapter from from your cable modem-most if not all are not modulated.

EVERY SINGLE LIGHTING STORE WANTS ME TO SELL THEM THESE SAMPLES IMMEDIATELY WHEN THEY SEE THEM but I guess I save some goodies for my buddies here first.

I have about 10 strips left.

Specs:
DC12V.1.5W Size:300*10*2mm,12 LED/30cm. Each 75mm for one cutting mark. 100000 hours lifespan.30cm/unit


Single color $15/strip
RGB $25/strip
Controller of RGB $25 (upto 6A current capability)
DC Jack to 4 pin connector $3 each


BLUE pending InkBlue
White pending KathyC
RGB pending "reply from Bad Coffee"

Storm Lighting Design pending if I can make it HAHAHAHHAHA


Whatever I cannot give you now you can go to this group buy thread

to preorder. When Paypal make sure you state your MR sn.

 

[vanceny]

How long is a strip and do they come with the power supply?

 

[inkblue]

Blue strip for me pLease winGo we'LL talk some more aBout the other project

...if I need the DC jack, i'll take one too

 

[Aqua Pro Builder]

Blue strip for me pLease winGo we'LL talk some more aBout the other project

...if I need the DC jack, i'll take one too

You do need the connector so
1 Blue Strip
1 DC Jack to 4 pin connector

RESERVED

 

[Aqua Pro Builder]

How long is a strip and do they come with the power supply?

They do not come with power supply.
A 12V ac/dc adapter from Radio Shack will work, make sure it's a modulated/regulated one.

300mm ~ 11.8 in

 

[inkblue]

i want a set please... i dont wanna have to looK for parts to make it woRk.

i'll wait for a set!

 

[Aqua Pro Builder]

i want a set please... i dont wanna have to looK for parts to make it woRk.

i'll wait for a set!

So do you mean you want a power supply too? I already save the connector and the strip as a set for you.

The only power supply I have is 36W which you can drive 24 strips

 

[bad coffee]

what kind of controller is it for the rgb strips?

B

 

[ming]

So when you wanna meet up Wingo?

 

[Aqua Pro Builder]

what kind of controller is it for the rgb strips?

B

The controller is a non-controllable equipment that will make the RG to blink, slowly blink, fade one to the other and so forth but just that you cannot tell it what to do. It runs its predefined programs only-you cannot choose :Hydrogen::biglaugh:

 

[Aqua Pro Builder]

So when you wanna meet up Wingo?

Lets see if I can pass by tonight after checking out a job site.

 

[jhale]

wingo what colors do you have left?
I'd like 2 white and 2 blue if you have them, plus whatever you need to work them.

thanks.

 

[bad coffee]

Wingo, if you can control each color separately I'll take an RGB one.

B

 

[KathyC]

I'd like 1 white and 1 blue. .and the connector (?)..the power supply I have already.

 

[Aqua Pro Builder]

I'd like 1 white and 1 blue. .and the connector (?)..the power supply I have already.

I have one white now, blue is pending but you can pre order in my group buy.
If you are making to seperate run, then you need two power cord connector else you need just one. The 4 pin connector for joining two strips together is free.

 

[Chiefmcfuz]

Wingo would it be possible to get a Red white and blue one about 1 ft long and have them fade in and out and flash individually to simulate a lightning storm on the reef?

 

[jhale]

wingo where is the group buy?

 

[Aqua Pro Builder]

Wingo, if you can control each color separately I'll take an RGB one.

B

You can make the dimmer by adding three trimmers on the R, G, and B Line. You then have the ability to control each individual color. The strip comes in 4 pins: 1 common, and 1 R, 1 G, 1B. All running at 12VDC. By adding trimmers to each independent line you can vary the voltage of each individual color. MAKE SURE you use a modulated/regulated power supply though. You can do that I know.

If you don't have the trimmer, I can order them along with my own electronics junks.

 

[jhale]

nm i saw the GB thread.

 

[Aqua Pro Builder]

Wingo would it be possible to get a Red white and blue one about 1 ft long and have them fade in and out and flash individually to simulate a lightning storm on the reef?

Not with the current controller the factory made. I am tricking them into making it though. They are very conservative in new products. However, I will see if I can come up with something like that myself as a prototype.