Location
Huntington
Rating - 100%
391   0   0
Reworked some of the plumbing. Been crazy at work so not as much done as I would like. Definitely coming down the home stretch though.

These pics feed the right tank. Running the intake through the chiller and then tee'd it off for my UV.

Drain lines are ran and last tank returns plumbed in.

Knock out the accessories tomorrow (hopefully) and then work on some wiring.



742eab0726f8f5b6fe2e4d7779c7c2f2.jpg
ea2ee90d3f6f1d1ba56f7c5cb48542f3.jpg
 

ravi197699

Thruster
Vendor
Location
Hicksville
Rating - 100%
151   0   0
only reason why it took me this long is my job, only I have to work on my tank is Saturday evening and Sunday, I have to keep wify happy as well so it tough..
 

editour2

Junior Member
Location
Suffolk County
Rating - 100%
34   0   0
Looking really good Mike.....so neat !!!! Love the color of the pvc also. Did you build in any way to clean those long runs on the pvc? After 5 or 6 years you won't believe the stuff that builds up in the pipes, especially around the turns...
Frank
 
Location
Huntington
Rating - 100%
391   0   0
Got some more done. Made the electrical cabinets. Laid out the controllers, now to drill the holes and paint.

Going with gloss white and black cord grommets.

The power bricks will be mounted below the controller board.

3f4137e2aef9d5184618ee7d9f5b59fc.jpg
8bd4899356efb9f390bf15302c5e68a1.jpg
ba5f5d34b0490a3c7c18762c8985394a.jpg
 
Location
Huntington
Rating - 100%
391   0   0
Thanks. Need to rework the one that goes between the 2 tanks, it is to close to the waterline. The one that is to the left of the longer tank is fine. Also need to figure what I am doing with the cables for the wavemakers. May need to cut them and make extensions.
 

ravi197699

Thruster
Vendor
Location
Hicksville
Rating - 100%
151   0   0
I had to make extension cables for ecotech and all the pumps I am using then I had to mark those extension cables with names so I know which cable is for which pump, I bought parts for extension cables for ecotech from digikey, let me know and I can send you list, pretty easy, for jebao and gyre I bought extension cables and cut them in half and added length to the cables, too bad everyone sell extension cable for gyres and jebaos that are 39 " in length...
 

Sponsor Reefs

We're a FREE website, and we exist because of hobbyists like YOU who help us run this community.

Click here to sponsor $10:


Top