The time on my AC Jr keeps falling behind. After a couple of weeks it'll be about 30 minutes slow. I figure it's the leap second setting that I have to adjust. Does anyone know what that setting should be set to?
Last edited:
AquaController Jr
- Thread starter DrGonzo
- Start date
- Location
- Bethpage,NY
It happens to most or all timers in my opinion.
- Location
- Holmdel NJ 07733
+1. I am constantly adding leap seconds to keep up. Also, several of the outlets on my DC8 have stopped working in AUTO mode, only ON and OFF still work. Any suggestions?
- Location
- Far Rockaway 11691
i always had the problem with the leap seconds. i use to just wait till time was about 30 min off then set the tank time.
i just did a google search it seems this problem is common. they have clearer instructions of how to do the leap second thing
http://www.tcmas.org/forums/showthread.php?t=5480
i just did a google search it seems this problem is common. they have clearer instructions of how to do the leap second thing
http://www.tcmas.org/forums/showthread.php?t=5480
big fan disconnect the phone cable and unplug the dc8 wait ten seconds and replug and connect if that dosent reset it then the dc8 is bad.
Also you can find out alot more here.
http://www.reefcentral.com/forums/forumdisplay.php?s=&forumid=368
Also you can find out alot more here.
http://www.reefcentral.com/forums/forumdisplay.php?s=&forumid=368
- Location
- Holmdel NJ 07733
Sponsor Reefs
We're a FREE website, and we exist because of hobbyists like YOU who help us run this community.
Click here to sponsor $10:
