- Location
- Columbia, SC
Here are some pics of the MACNA sump we built. The bottom was done in UV blue acrylic (about $500.00 per sheet). We lit it up under a black light box that housed to UV lamps (black lights) to get the desired effect from the UV acrylic. The sump was cut on our laser saw (cuts 9' x 4' sheets up to 1 1/4" thick acrylic.The bottom was then moved over to the laser engraving table for the name and logo engraving. The baffels are removable by the way. If you look close you will see the 4" OD canister holders and 3 probe holders on the back wall of the sump. On the 2nd and 3rd day of the show we added water and hooked up the Peltec chiller/heater and raised the temp down to 49 degrees and then bumped it up to 140 just for fun. Maybe we should have chilled some beverages at the booth...hmmm maybe next year at MACNA
.
You can see some more of our work here:
http://www.aquariumspecialty.com/catalog/index.php?cPath=115
The last picture was the coral we had at our booth. All of the corals were purchased at the show.
http://www.aquariumspecialty.com/catalog/index.php?cPath=30
This is a link to our forum drawing.
http://www.aquariumspecialty.com/catalog/index.php?cPath=30
Thanks for checking it out.
You can see some more of our work here:
http://www.aquariumspecialty.com/catalog/index.php?cPath=115
The last picture was the coral we had at our booth. All of the corals were purchased at the show.
http://www.aquariumspecialty.com/catalog/index.php?cPath=30
This is a link to our forum drawing.
http://www.aquariumspecialty.com/catalog/index.php?cPath=30
Thanks for checking it out.
Attachments
Last edited: