- Location
- Dingmans ferry PA
i need the adjustable drain durso.only on LI PLEASE..PM me what you have and for how much.thank you
WTB 1 1/4 durso drain pipe
- Thread starter duke62
- Start date
- Location
- riverhead long island
You can make one real easy my friend...dursostandpipes.com..has directions
Sent from my Droid using Reefs
Sent from my Droid using Reefs
- Location
- Dingmans ferry PA
no i dont like that.i want an adjustable pipe.still looking.im not spending 50 bucks for it from a LFS..help a brother out 
- Location
- Long Island
What do you mean by adjustable? The flexible one that they sell?
You can make one for cheaper than any you can buy, the only thing hard to find but not 100% necessary is the thin wall PVC. All you need is a 2' section of pipe, a T, a cap, and a street L or 90deg elbow. Only other pieces you need would be whatever reducer to connect to your type of bulkhead. If threaded, then lowes and hd sell 1 1/4 - 1" reducer threaded. That's what I did. The one from durso only runs like 30 something.. if you want the flexible one just get a section if spa flex from an ace hardware
Both lowes and hd sell 2' pieces of schedule 40
You can make one for cheaper than any you can buy, the only thing hard to find but not 100% necessary is the thin wall PVC. All you need is a 2' section of pipe, a T, a cap, and a street L or 90deg elbow. Only other pieces you need would be whatever reducer to connect to your type of bulkhead. If threaded, then lowes and hd sell 1 1/4 - 1" reducer threaded. That's what I did. The one from durso only runs like 30 something.. if you want the flexible one just get a section if spa flex from an ace hardware
Both lowes and hd sell 2' pieces of schedule 40
- Location
- Dingmans ferry PA
i want the one you can adjust height ways..my tank is very difficult to get to the back and i dont want to keep messing with it.i want to be able to adjust the height whenever i want.its a stock over flow pipe.i have everything else i just need the pipe
- Location
- Long Island
Gotcha, I've never seen one setup like that for sale, But, there is a simple fitting you can get that does exactly that. They have it at ace for sure, not so sure if the big stores have it. I'm going to ace soon, I can post the name shortly, it's basically a sliding PVC connector, you could prob just put that piece in line below the T of the durso. They used that fitting on the older models of Bermuda aquatics skimmers before they put the gate valve in.
Edit- this is what I'm referring to, is this what u r looking for?
Telescoping couple
http://flexpvc.com/cart/agora.cgi?product=PVC-Couples-Telescoping
Edit- this is what I'm referring to, is this what u r looking for?
Telescoping couple
http://flexpvc.com/cart/agora.cgi?product=PVC-Couples-Telescoping
Last edited:
- Location
- Dingmans ferry PA
Use the link provided. I made mine the same way on my 300 build. You can adjust the hight with the T in the durso as its not glued in quiet as can be.
Mine has 3400 gph going trough 1700 each drain and no noise. Just put ball or gate valves on the drain and return line to adjust the flow if you do happen to have noise
Mine has 3400 gph going trough 1700 each drain and no noise. Just put ball or gate valves on the drain and return line to adjust the flow if you do happen to have noise
DaddyReefer13
Advanced Reefer
- Location
- Queens, 11377
I have to construct one myself, kinda curious on what this looks like. Do you have a pic?
- Location
- Dingmans ferry PA
yeah i have a pic.send me your number and ill send it to you.i used the coupling in the link up above
Sponsor Reefs
We're a FREE website, and we exist because of hobbyists like YOU who help us run this community.
Click here to sponsor $10:
