Hook up a RO Unit in NJ

[suprastan]

I need my RO unit hooked up in Sparta, NJ.

Will be hooked to cement walls, and direct connected to copper plumbing. I will need the copper tap as well a float valve to top the water in the 50 GAL unit..

Im willing to pay... PM your labor..

 

[duke62]

this will be in a basement?if so hook up a Y to your washing machine and either leave it close to your washing machine or run a hose to your unit

 

[thirty6]

this will be in a basement?if so hook up a Y to your washing machine and either leave it close to your washing machine or run a hose to your unit

Just ordered one, this s how it will be set up

 

[thirty5]

"TECHNICALLY" someone cannot touch your plumbing in your house without a plumbing license. At least in NJ a homeowner can do whatever they want.

I would do what was recommended as above. I am ordering a new RO today and I will be connecting the same way. I am ordering the float with the unit. Just need to drill couple holes in the concrete and hang with the Blue Tek Screws (made for concrete)

 

[duke62]

or what i did was use a nail shot gun and nailed in a small piece of plywood then usede regular screws to hang it from the plywood.this works better because if you ever get a new rodi you can just remove the screws on plywood and adjust them.

 

[FishBrain]

I have flex hose on my faucet connections, they sell an adapter the screws on between the copper and the flex hose and has a quick connect for the 1/4" RO line.

I'll shoot you a PM over on NJRC. Throw me a 20 for gas and I'll take a trip up your way and give you a hand installing it.

 

[suprastan]

I have flex hose on my faucet connections, they sell an adapter the screws on between the copper and the flex hose and has a quick connect for the 1/4" RO line.

I'll shoot you a PM over on NJRC. Throw me a 20 for gas and I'll take a trip up your way and give you a hand installing it.

Thanks man..

 

[thirty5]

or what i did was use a nail shot gun and nailed in a small piece of plywood then usede regular screws to hang it from the plywood.this works better because if you ever get a new rodi you can just remove the screws on plywood and adjust them.

LOL Duke!!

He is looking to get someone to mount on the wall and you are talking about that type of tool. Most people might not even know what that is!

You can also just screw the board to the wall using the tek screws.