Someone to drill my tank

[Cadiz.Jonathan]

Looking for someone confident to drill my jbj 28 willing to pay. Every glass shop says if the break it it's not on them but I feel like if you know what your doing y would u Evan consider it. Thanks

 

[reefsmaniac]

try to contact stbarnabas he did my tank 46gallon bow ...... he is from the bronx also ....

 

[reefs4life]

I may be wrong but I think that nanos are usually tempered on all sides

 

[NYreefNoob]

they tell you that because if it breaks it isnt on them, same as glass company that takes a windshield out will tell you no guarentee against the glass breaking when they take it out, liability coverage for them

 

[Cadiz.Jonathan]

So should I go with the glass company then? How big should I get the hole drilled it's a 28gal.

 

[NYreefNoob]

i had drilled a aquapod 24g with no problem till i tightened the bulkhead then back cracked, why not get a regular tank if your going to drill it

 

[Cadiz.Jonathan]

Well I like nanos just wanted to throw a nice big skimmer and a refu in a sump make the tank more successful.

 

[Wolverine57]

+ 1 I had a 24G Aquapod drilled also, just becareful with the BK HD or PVC. It was drilled by Jim House of Laughter.

 

[Fishluva513]

I can do it. Every1 always says its not my fault if it breaks. 1 wrong turn of the drill might crack it. Ive drill hundreds of tanks and ive had my share of just plain freak acciddents

 

[TRIGGERMAN]

you don't have to drill it you can always get a hang on fuge/decent skimmer to fit in the back. I have also used an in tank fuge which is small. I'm not using my nano anymore so if you are interested in the in tank fuge I'd sell mine. I also have a hang on fuge