help with sump setup

[youngfish]

The tank drain is 1.5" while the sump has two 1" intake for socks.
What component I need to connect one 1.5" drain to two 1" pipes?

 

[samksy]

Just get two pvc reduce in home depot, from 1.5" to 1 inch. It'll be in the PVC piping section. If you have trouble, just tell those homedepot guy, they'll find it for you. Good luck!

Something like this but you need from 1.5" to 1" inch.

http://www.homedepot.com/h_d1/N-25e...ngId=-1&keyword=1.5+pvc+reducer&storeId=10051

 

[youngfish]

The drain side needs 1.5" male screw while the sump needs 1" PVC pipe.
I need one 1.5" screw to two 1" PVC pipe connection.
Is there any way to achieve that? Thx

 

[samksy]

The drain side needs 1.5" male screw while the sump needs 1" PVC pipe.
I need one 1.5" screw to two 1" PVC pipe connection.
Is there any way to achieve that? Thx

If i'm readying correctly, your drain from display tank is one 1.5 inch into two one inch sump. If you want to drain to two, u can use wye or tee pvc.

Use this and put reducer from 1.5 to 1 inch on both side and connect to the sump.
http://www.homedepot.com/h_d1/N-5yc...gId=-1&keyword=1.5+inch+pvc+tee&storeId=10051

Use this and put reducer from 1.5 to 1 inch on both outlet, but this wouldn't be even, most water will go onto one side i think cuz of how the WYE is.
http://www.homedepot.com/h_d1/N-5yc...rd=wye+pvc&storeId=10051&superSkuId=202904964

 

[youngfish]

Thanks Sam. I will try what you suggested.