auto top off design hemp............!!!!

[ravi197699]

auto top off design help............!!!!

hello mr i have bucket that i use for auto top off water reserve. i have bought two float switches and one 110v water solinoid and i need help to make design that will work. what i want to gain is that when water bucket is empty i want my solinoid to trun on and fill the bucket and then when its full i want it to trun off. is it possible to do ? if it is how would i mount those float switches? please help


thankx

 

[ravi197699]

thank you i have fixed it how about some help with this thread now ....

 

[samksy]

thank you i have fixed it how about some help with this thread now ....

:scratch: i used to connect my RODI filter to my water reserve bucket with a float valve mounted in the bucket so the RODI filter would stop when water reach a certain level in my water reserve bucket. And i drilled a hole on the bottom of water reserve bucket and connected to the sump with a float valve for top off. or you can directly connect your RODI filter directly to the sump using a float value for top off but make sure your RODI filter have an auto shut off for safety, u dont' want to pour excessive water into your DT. good luck!

 

[ravi197699]

can this be achieved with float switched mounted in bucket and solinoid to rodi line when bucket is empty open the solinoid and when full solinoid off. but i want to open the solinoid only when bucket is empty ?

 

[Ziggy]

can this be achieved with float switched mounted in bucket and solinoid to rodi line when bucket is empty open the solinoid and when full solinoid off. but i want to open the solinoid only when bucket is empty ?

You will need controller to do that like reef keeper or apex.

 

[ravi197699]

i have ato with two switches and apex both i was going to use ato but don't know how to achieve what i want . i want ato to turn the valve on and fill the bucket and when its full i want it to trun off but want it to come on again only when bucket is empty . is it possible

 

[Ziggy]

Set one of outlets as ATO