- Location
- 11756
I'm thinking of removing an AGA overflow box to gain some room inside the tank and sealing off the bulkheads for that overflow box.
I was wondering if anyone has done this and what you did to close up the bulkhead holes.
My options are:
The tank is a 125g (72 x 18in).
Is this safe to do?:turtle:
Thanks,
Kris
I was wondering if anyone has done this and what you did to close up the bulkhead holes.
My options are:
- Get a thick piece of glass and silicone it to the inside of the tank covering the holes permanently.
- Keeping the bulkheads in place, attaching valves outside of the tank and keeping them closed
- Using the two holes for the return
The tank is a 125g (72 x 18in).
Is this safe to do?:turtle:
Thanks,
Kris