New gyre pump from Maxspect

[jcdeng]

Can it be linked to apex? or does it allow you to have different modes during different time of day?

thanks

I received my Beta Gyre pump last week and played around with it on my FOWLR as I waited to rescape the reef.

Well, I just hooked up the Gyre pump to my 8' x 24" x 24" 240g. SPS dominated reef system and I'm super impressed with the results. The system has been run for years on 5 MP40's -- 1 on each end and 3 placed along the back wall. The tank ( unfortunately) has 2 large overflow boxes about 6" from each end forcing me to move the Gyre futher toward the front glass than I would ideally like. I placed it horizontally about 4" from the surface and shut off all the Vortechs leaving only the rather meager return pump on.

As I ramped up the flow, it was obvious that the pattern created was very different and the first thing I noticed was that the fish began bobbing in the open water column in a very natural looking way.
Surface water ripples were seen all the way across the 8' span, but I would say that adequate current was really only seen up to about 6' , but this included all the way to the back wall in between the overflow boxes which was very impressive. I then turned on the MP40 at the opposite end and the combination of the two is most excellent. I also turned on 1 of the back wall MP40's as well because of a few dead spots due to the way my rock work is placed and I can say for sure the flow in my system has never been better.

Because of the way my rockwork is designed around the overflow and the coral growth on the Vortech end, it would be difficult to place a 2nd Gyre without totally blasting some corals. If not for this, it is apparent that 2 Gyre pumps would easily replace 4 Vortechs and possibly all 5. As it stands, it looks like I'll be able to remove 3 and go with the Gyre and 2 MP 40's.

I think I have the most basic possible controller as it seems I can only turn the flow up or down, so I can't commemt on pulsing patterns etc.

I'll work on a video when I get the chance. but suffice it to say, I am very pleased and impressed.

 

[prattreef]

Randy, what size did you get GPH?
and i just spent $650 on 2 tunzes.

AFAIK they only have released the 50w ( largest) one to Beta testers.

JC-- I don't know about Apex compatibility, but it doesn't seem so at least with the first run. I have a very simple controller and not the one that will be released with the product, but I believe it will have multiple modes and pulsing capability etc.

 

[lnevo]

Here's the quick start guide and pics of the controller. The only way it'll be apex compat is if they add an input on the advanced controller or if you can disconnect the controller and put something inline like the jaebos.

http://www.canreef.com/vbulletin/showthread.php?threadid=109085&page=2

 

[duke62]

Randy do you have a 50w beta tester? If so is it strong enough for. 180?

 

[crox99]

It looks like that they will available by the end of this month but not the largest one.

 

[duke62]

I believe Tom from Extreme Aqua of New Jersey will have like 20 in stock when they are released. Better jump on them because these will sell out quick and will be hard to find since so many people want one

 

[vio]

I believe Tom from Extreme Aqua of New Jersey will have like 20 in stock when they are released. Better jump on them because these will sell out quick and will be hard to find since so many people want one

Super.

 

[Marek-S]

It really looks good
I guess we all need to see it in action