- Location
- Washington Heights, NY
I've been thinking about doing a 4 sides showing almost-cube. It will be 36"*36"*20" 1" thick acrylic. The water will probably go up to 19-19.5". Here's some design pictures.
Front
Right Corner
Top
Left Side
Right Side
My plan is to cover the overflow with rock by drilling holes or some type of reef ceramics. The overflow will be a 4.25" cylinder and the standpipe 1.5". It will be roughly 95G and I'll only have 1200-1300gph flow. This way all the flow will be going thru the sump and 1" pipe will be returned up to the canopy where a OM super squirt will be. What I want to achieve is no plumbing showing with all four side clear. Any suggestions/opinions welcome. Thanks.
Front

Right Corner

Top

Left Side

Right Side

My plan is to cover the overflow with rock by drilling holes or some type of reef ceramics. The overflow will be a 4.25" cylinder and the standpipe 1.5". It will be roughly 95G and I'll only have 1200-1300gph flow. This way all the flow will be going thru the sump and 1" pipe will be returned up to the canopy where a OM super squirt will be. What I want to achieve is no plumbing showing with all four side clear. Any suggestions/opinions welcome. Thanks.