nickxx4360
Member
- Location
- White plains, NY
I have a Kent marine Maxxima RO/DI 35gpd system. I replaced all the cartridges including the membrane. I used a 75gpd membrance instead of a 35gpd membrane now.
When I run the system the DI clear canister does not fill up @ all. Instead it fills up in the DI cartridge itself ( the Cartridge is the one where you can refill the resin btw). I checked the water with my TDS meter and it reads all zero's.
this is the water flow: sediment> carbon block> membrane>DI canister.
Should I be worried at all? Water flows out of the exit hose fine, it just does not fill the last canister, just the DI cartridge in the last canister.
Thanks
When I run the system the DI clear canister does not fill up @ all. Instead it fills up in the DI cartridge itself ( the Cartridge is the one where you can refill the resin btw). I checked the water with my TDS meter and it reads all zero's.
this is the water flow: sediment> carbon block> membrane>DI canister.
Should I be worried at all? Water flows out of the exit hose fine, it just does not fill the last canister, just the DI cartridge in the last canister.
Thanks