• Why not take a moment to introduce yourself to our members?

Status
Not open for further replies.

gvanwhy

Advanced Reefer
Rating - 100%
52   0   0
I purchased a Deep Blue 75 gallon rimless tank yesterday and realized that once i put it on my stand (which is perfectly level) the plastic black brace on the bottom of the tank was flush against the stand on the right side but gradually lifted up an 1/8 inch from the center of the tank to the left side. Im not sure if this is just the brace since the top and sides of the tank are completely level. would the brace settle into position once i fill the tank or am i looking at a leak in the future. has anyone else had this problem. see the attached photos. the fourth picture shows that the stand is level on the left side
 

Attachments

  • photo 1.JPG
    photo 1.JPG
    98.7 KB · Views: 487
  • photo 2.JPG
    photo 2.JPG
    96.4 KB · Views: 470
  • photo 3.JPG
    photo 3.JPG
    91.1 KB · Views: 472
  • photo 4.JPG
    photo 4.JPG
    101.5 KB · Views: 465

gvanwhy

Advanced Reefer
Rating - 100%
52   0   0
Figured it out. I put those felt moving pads under the stand when i was building it which made the stand slightly unlevel. I just shimmed it with ez shims (plastic shims) now everything is perfect. Thanks for the input guys. Mods please close thread
 
Status
Not open for further replies.

Sponsor Reefs

We're a FREE website, and we exist because of hobbyists like YOU who help us run this community.

Click here to sponsor $10:


Top