Brando457

NJRC Member
Location
North, NJ
Rating - 100%
44   0   0
There's only one return in the center. Left side is the feed side from the pump. That tube off right return serves as the siphon break.

Sent from my SAMSUNG-SGH-I727 using Tapatalk
 

Brando457

NJRC Member
Location
North, NJ
Rating - 100%
44   0   0
Some plumbing pics, i cleaned up all the sawdust and what not.

http://s97.photobucket.com/albums/l240/Brando457/75g%20build/Plumbing/

uploadfromtaptalk1325037260858.jpg


20120108_145114.jpg


20120108_145108.jpg
 

Brando457

NJRC Member
Location
North, NJ
Rating - 100%
44   0   0
First does anyone know what this valve coming off my RO's waste line is for and which way it should go?

20120112_215019.jpg


Now on to the plumbing YES I KNOW I SHOULD NOT HAVE USED ALL THESE 90s, BUT IT WORKS and it works well enough where I have a great amount of flow from the pump still to the point where I may need to use that valve and divert some to the fuge.


Also I felt it better to run the drains right to the skimmer then let that water flow over to the fuge rather than do a drain into the fuge. The pipes aren't glued so if I change my mind I can always do that.




20120112_222816.jpg



20120112_222823.jpg


20120112_222828.jpg


20120112_222835.jpg


And last but not least thanks to BreakingNewz for the frag tank :X

20120112_222847.jpg


20120112_222900.jpg


20120112_222908.jpg
 

Brando457

NJRC Member
Location
North, NJ
Rating - 100%
44   0   0
Joe yes it is where my 180 was, I figured it'd be better for me as far as noise

and Angel noooooooo don't say that, thankfully my parenst tolerate it

626dd838-0d44-006e.jpg
 

Brando457

NJRC Member
Location
North, NJ
Rating - 100%
44   0   0
kiddo haha i'm 24 and look like I are 6 kids.

I have a big tarp I put down to collect water and stuff. only flooded basement twice

Sent from my SAMSUNG-SGH-I727 using Tapatalk
 

Brando457

NJRC Member
Location
North, NJ
Rating - 100%
44   0   0
Actually had a question about that I have this skimmer


http://www.reefspecialty.com/index....mid=1&option=com_virtuemart&vmcchk=1&Itemid=1

It uses this pump

Features the new Bubble Blaster HY1000S - 900lph or 31scfh

I can't for the life of me find out how many gph it puts out, but was thinking I can use that for mixing water since I have it and its extra or I was thinking of even using it for my reactors when I run them. Any ideas?
 

Sponsor Reefs

We're a FREE website, and we exist because of hobbyists like YOU who help us run this community.

Click here to sponsor $10:


Top