- Location
- Brooklyn - Prospect Heights
Just watched the video. Why is the drain so loud....
Taking care of that is my next project. The drain is a 1" hole in the bottom with a short standpipe inside then 1" pvc to my sump with 2 45 degree bends, fairly simple. The drain not only makes this loud gurgle it also doesn't drain much water. I have to keep my return which is a CAP2200 dialed most of the way down otherwise the tank will overflow. I think running full out it only should give me 300-350 gph. (which I thought a 1" drain could more than keep up with, calculator tells me .77" can do 350gph)
During my water test of the tank I was able to run the return full blast. I did change out the pvc and modify the shape a bit for my sump but overall the setup is very similar.
ideas? I'm not sure if increasing the flow thru the drain will help the sound or if I should be trying something to quiet the overflow.