manufacturer: All Seas Marine (http://www.asmskimmer.com)
model: G-3
type: needle wheel impeller
Pump: sedra 5000
tank size: 75 gallon
notes: Was easy to setup, is easy to adjust, and fool-proof! Good skimmage and built strong! Going with a "gate-less" gate valve mod just to keep hands dry and later will probably do a recirculating mod.
Manufacturer: Kent Marine
Model: Nautilus TE Turbo-Eductor Skimmer (300 gal.)
Pump: mag 700
Tank size: 150 gal.
Notes: Skimmer is a venturi cup type,works GREAT, have had it for over 5 years with no problems 8)
Manufacturer: C.P.R.
Model: CPR 2R+
Pump: MJ-1200
Tank size: For tanks up to 60 gallons (Mine is a 40 Br)
Notes: Skimmer is a bubble chop skimmer. Great skimmer, only have to get over slight micro-bubbles in tank for first couple of weeks or so, and then away it goes. Pulls great skimmate for my tank and I use it as the only means of filtration aside from water changes.
OK, I bought a Pro-Clear 150. It looks cheaply made compared to what I see on other tanks. Its still in its packaging and I can exchange. The LFS recommended it when I was buying most of my stuff. He was trying to keep within my budget.
What do you recommend?
My set-up is...
Under construction
140g Built in 60x18x30 Dual overflows
20g sump
20g refug
1/4 JBJ chiller
return pump undecided
rest is undecided
i have something called an octopus injection skimmer
it looked really cool and the guy that ran the store had him on all of his tanks though i know nothing about it or how to make it work pictures to follow
manufacturer: Euroreef www.euro-reef.com
model: RS250
type: needle wheel impeller
Pump: sedra GEN-X 6000
tank size: 150 gallon
notes: I replaced the supplied riser with a service coupling, tee and elbow (see photo).
Have had this baby going for about 4 years (Or since they started making them) and I really like it. A little noisy, and you have got to use vinigar to clean the jet (no access) but a really, really good skimmer for the money.
i got a aqua c ev180 spray injection type skimmer powered by a mag 7
its probably the best skimmer i have ever seen or used
i got it so the skim mate needs to be empited ever 3to 4 days not wet not dry ,i just empited it and it was about the most foul thing i have ever smelled in my life ,it came out looking like black coffie
also it is super silent another plus
manufacturer:
RK2 Systems Inc. 421A South Andreasen Drive
Escondido, California 92029
Phone: 760/746-7400
Fax:760/746-7460
Price: $2299.99
model: PS-RK10-AC
type: Venturi
Pump: RK2-single energy efficient venturi pump operating at 220 volts using 1.15 amps.
tank size: 1000gallon
notes: Description: RK10-AC Protein Fractionator. Clear acrylic body. 10 inch diameter by 80 inch height, automatic wash down system. Rated capacity up to 1000 gallons. 10 gallons per minute at 2 minutes dwell time. 13 gallons per minute at 1.5 minutes dwell time. Includes single energy efficient venturi pump operating at 220 volts using 1.15 amps. 14 inch by 36 inch basal dimensions. All RK2 fractionators are built of high-quality, long-lasting, saltwater- and ozone-compatible materials. They feature dedicated venturi pumps, ozone-resistant Kynar® injectors, wash-down sprayers with electronic interval timers, EPDM flange gaskets, level control valves and unions or flanges at all ports. All motors available with any electrical configuration. AC models have clear bodies. PE models have high density polyethylene (HDPE) bodies. All have clear, acrylic reaction chambers. Ozone systems (with air dryers and oxygen generators) are sold separately. Ships motor freight, FOB factory. Crating charge is included in price. One-year limited warranty. Made in USA.