Recent content by Buckeye Hydro

Check to make sure the plug where the wires enter the top of the meter is fully plugged in. Russ

When it is time to change the filters out, get rid of the GAC filter and replace it with a carbon block.

Get rid of those horizontal DI stages. Orient them vertically with bottom ->up flow in each.

Good answer! Russ

There's no pump involved here, right? I would say that your situation is not ideal, but it will work, assuming you have decent water pressure. Its your plumbing water pressure that is "the pump" in this situation. Russ

Hope you sell it. Whatever you do - don't dump it in the ocean!:)

Well, yes. The ASOV's typically have 4 ports. You snip some lines on your existing RO system and route the lines through the ASOV and check valve. So if you get an ASOV, just to make your life a little easier, you might want to also buy some 1/4" tubing to help you plumb the ASOV in. Russ

Be careful with ASOV's - this is not something where you want to shop based on price alone. Over the years we've tried many brands before we settled on the brand we've now carried for years. It's not the cheapest. We found the cheapest versions we could buy just didn't work well/consistently...

To get an RODI system to automatically shut off you need 3 parts: 1. A check valve 2. An auto shut off valve 3. A valve (e.g., a float valve) at end end of the output tube. We just changed our username from Buckeye Field Supply to Buckeye Hydro and it won't let us post the picture we wanted...